Hi, Geoff, thank you for answer,
I did this discussion because, as I explained at the two other topics of this forum I did, I can't perceive a MIDI message working in my DAW:
My DAW is Pro Tools 10.3.9 HD and I use a controller USB keyboard Behringer UMX610. I use an audio interface Behringer UMC404HD.
I wrote two MIDI messages to test: Channel Fine Tuning and Channel Coarse Tuning.
The Channel Fine Tuning MIDI message works, probably, but I can't perceive working Channel Coarse Tuning.
I don't know If I am expecting the effect wrong from the MIDI message, because I don't know It, but I don't know why apparently Channel Coarse Tuning doesn't work.
The Channel Fine Tuning apparently works well: I saw the difference between the values of Tuning from 0 until 127 on Data Entry MSB and LSB. I perceived the change in the Fine Tuning for the different values.
But for Channel Coarse Tuning, I did not see any effect working.
I don't know If I didn't perceive difference between the values from Channel Coarse Tuning for I don't know its effect and result which It is, but I was putting different values of Data Entry MSB and I didn't see It work.
I wrote the MIDI message, I guess, correctly in MIDI Event List in Pro Tools:
CC 101: 0
CC 100: 2
CC 6: any value, but It does not work.
And the other MIDI message, the Channel Fine Tuning, works well in the MIDI Event List.
Sema sent me two test MIDI files, but I don't know why, they did not work too: Channel Coarse Tuning and Master Coarse Tuning, in my DAW Pro Tools.
I think my DAW Pro Tools doesn't read and write and play Coarse Tuning.
I tested by Cell phone those MIDI messages he sent me and Channel Coarse Tuning was read, but Master Coarse Tuning (SysEx) did not do.
Then, I used JZZ-MIDI-SMF by Cell phone and finally my Cell phone read the SysEx message Master Coarse Tuning.
Therefore, I thought If I install JZZ-MIDI-SMF to my computer, my DAW could read MIDI messages as like SysEx Master Coarse Tuning and Channel Coarse Tuning.
And then, what do you think?
As I did on Cell phone, using JZZ-MIDI-SMF, the Cell phone read MIDI messages like SysEx Master Coarse Tuning, Will my DAW Pro Tools read too SysEx Master Coarse Tuning and Channel Coarse Tuning which before did not read?
Will It be needful I install JZZ-MIDI-SMF or some other software MIDI library like this from this link bellow so that my DAW Pro Tools can read some MIDI messages It does not read until now?
Will my DAW Pro Tools read SysEx Master Coarse Tuning or even Channel Coarse Tuning If I install JZZ-MIDI-SMF or some other piece of software around?